Wyse Technology 3820TX - Manual (Page 27)

17
Figure 13 Backlight properties
Keyboard Settings
You can enable and control the rate that characters repeat when holding down a key on a
keyboard connected through the PS2 port to the 3820TX tablet thin client by completing
the following procedures:
1. Double-tap the Keyboard icon to open the properties sheet.
2. If desired, enable the character repeat by checking the box.
3. Set the repeat delay using the slider on the left.
4. Set the repeat rate using the slider on the right.
5. Click OK to save the settings.
Figure 14 Keyboard settings
Mouse Settings
You can control the double click characteristics of a mouse connected through the PS2 or
USB port to the 3820TX tablet thin client by completing the following procedures:
1. Double-tap the Mouse icon to open the properties sheet.
2. Set the double click position sensitivity using the grid at the top of the window.
3. Check the double click position sensitivity using the slider at the bottom of the window.
4. Click OK to save the settings.