WorldSpace wssr-11 - Manual (Page 15)

1 5
PA S SW O R D
You will be issued a password that is unique to your re c e i ver and cannot be used
with another re c e i ve r. Pa s s w o rds are entered once and then stored. This password
remains stored and valid for the whole subscription period. A password is either 22
or 25 digits in length. The re c e i ver can store up to 8 passwords for different services.
Entering password mode:
1) Press and hold the S E RVICE CO M P O N E N T + button for more than 2 seconds.
The LCD panel shows “A _ _ _ _ _”. The blinking cursor indicates your
c u r rent position.
2) Enter the first 5 digits.
Enter the first digit by using the B ROA D CAST C H A N N E L ▲/▼ buttons
to scroll through digits (0–9). When the proper digit is in the field, use the
S E RVICE CO M P O N E N T + and – buttons to move the cursor to the left or right.
3) After you have entered the fifth digit, press the S E RVICE CO M P O N E N T + b u t t o n
to move to the next scre e n .
The LCD panel shows “B _ _ _ _ _.”
4) Enter the next 5 digits.
As you complete each screen, press the S E RVICE CO M P O N E N T + button to move
to the next screen. When you are finished, you will have completed five scre e n s ,
“Ax x x x x ” t h rough “Exxxxx”. If you we re given a 22-digit password, leave the last
3 digits of scre e n “ Exx _ _ _” blank.
Completing the password entry pro c e s s
To end the password entry pro c e s s :
1) Press and hold the S E RVICE CO M P O N E N T + button for more than 2 seconds.
“ C HE C KING” appears on the LCD panel as the password is being verified. If the
p a s s w o rd is correct, the LCD panel will show “ACC EP TED” for 3 seconds.