West Bend Chris Freytag L5760 - Manual (Page 5)

1. Place the filter bowl over the motor base aligning the juice outlet spout over the
notch in the motor base. Press down with a slight twisting motion until it sits flat.
Step 1
2. Place the juicer blade into the filter bowl. Rotate if necessary to align with the
motor drive and press down firmly until the juicer blade is tight and even with the
top of the filter bowl. CAUTION: There are many small sharp blades for
processing the fruits and vegetables. Use care when handling the juicer blade
to reduce the risk of injury.
Step 2
3. Center the juicer cover over the filter bowl and carefully align the juicer cover so
the pulp outlet chute sits within the edges of the filter bowl.
Step 3 Step 3A
5