Wells-Gardner D9410 Series - Manual (Page 5)

Wells-Gardner Electronics Corporation
A. ADJUSTMENT PROCEDURE .
BRIGHTNESS ADJUSTMENT
1) Press the “OSD” key The Main-Menu OSD will come up as pictured above.
2) Search “BRIGHTNESS” sub-menu using “+ or - FUN” key on the Main-Menu OSD.
3) The “BRIGHTNESS” OSD color changes from blue to red.
4) Adjust Brightness as much as you want using “+ or -” key.
5) After finishing the Brightness adjust, press the “OSD ” key. The “OSD” will
Disappear. The new Brightness value will be saved automatically.
6) If you want to adjust other functions (sub-menu), search the function using “+ or -” keys,
and then repeat the same procedures of steps 2-5. See next page.
7) Press the “OSD” key again to finish adjustments and the OSD will disappear.
If no action is taken in the OSD, the menu will disappear by itself.