Wells-Gardner D9300 Series User Manual

Page 10

Advertising
background image

Wells-Gardner Electronics Corporation

8

6-3. OSD

Controls

- User’s control.

A. BRIGHTNESS ADJUSTMENT.
1) Press the “MODE” key then Main-Menu OSD comes out as figure on next page.
2) Search “BRIGHTNESS” sub-menu using “UP/DOWN” key on the Main-Menu OSD.
3) Select the “BRIGHTNESS” by pressing “SEL” key. The “BRIGHTNESS” OSD color

changes from yellow to red.

4) Adjust Brightness as much as you want using “UP/DOWN” key.
5) After finishing the Brightness adjust, press the “MODE” key. The “BRIGHTNESS” OSD

color changes from red to yellow and the changed Brightness value saves automatically.

6) If you want to adjust other functions (sub-menu), search the function using “UP/DOWN”

keys, and then repeat the same procedures of steps 3-5.

7) Press the “MODE” key again to finish adjustments and the OSD will disappear.

If no action is taken in the OSD, the menu will disappear by itself.

Advertising