Wells-Gardner D9300 Series User Manual

Page 12

Advertising
background image

Wells-Gardner Electronics Corporation

10

6-3 OSD Controls (continued):

K. COLOR

ADJUSTMENT

1) Press the “MODE” to show the Main-Menu OSD as shown by the left-below figure.
2) Search the “COLOR” sub-menu using “UP/DOWN” key on the Main-Menu OSD.
3) SELECT the “COLOR” by pressing “SEL” key. The color Sub-Menu OSD appears as

shown by the right-below figure.

4) Search “USER” using “UP/DOWN” key. (“COLOR1” and “COLOR2” are adjusted in

factory by auto-alignment machine.)

5) Press “SELECT” key to adjust “RED”, “GREEN” and “BLUE”. Each is selected by

pressing the “SELECT” key. The selected item changes OSD color from white to shown
it’s own color as the character. (ex. “RED” goes red in color).

6) Adjust “RED”, “GREEN” or “BLUE” using “UP/DOWN” key.
7) Press “MODE” key to finish the color adjustment. The OSD will then go back to the

Main-Menu.

8) Press the “MODE” key again to finish adjustments and make the OSD disappear.

COLOR ADJUST

Advertising