Wrangler JEEP P5063 - Manual (Page 12)

P5063pr-0923
13
• Insert the tabs on the rear edge of the hood into the slots in
the front of the dashboard.
• Pull the hood forward. Lower the hood closed.
Dashboard Slots
Hood Tabs
12
ASSEMBLY F
P5063a-0920
12
• Insert a hood latch into each slot in the front end of the vehicle.
• Turn each hood latch a
1 / 4 turn to fit in place. Pull up on the
hood latches to be sure they are secure.
Hood Latches
Slots
11
• Turn the vehicle upright.
• Position the windshield so that the molded detail on the wipers
faces the front end of the vehicle.
• Insert and "snap" both large tabs on the windshield into the
large slots in the dashboard.
• Pull up on the windshield to be sure it is secure.
Large
Tab
Windshield Wiper
Large
Tab
Slot
Slot
• Insert a #8 x ¾" screw through the large opening in the
steering column cap and the hole in the steering column.
Tighten the screw.
10
FRONT VIEW