Wolf Appliance Company CT15E - Manual (Page 18)

18
T R O U B L E S H O O T I N G
I F C O O K T O P D O E S N O T O P E R A T E
IMPORTANT NOTE: If the electric cooktop
does not operate properly, follow these
troubleshooting steps:
Verify that power is being supplied to the
cooktop.
Check electrical connections to ensure that
the installation has been completed
correctly.
Follow troubleshooting procedures as
described in the Wolf Electric Cooktops
Use & Care Information.
If the cooktop still does not work, contact
a Wolf authorized service center. Do not
attempt to repair the cooktop yourself.
Wolf is not responsible for service required
to correct a faulty installation.
This cooktop must be repaired only by a
Wolf authorized service center. The unit
must be disconnected from power prior
to service.
W O L F E L E C T R I C C O O K TO P S
V E N T I L AT I O N O P T I O N S
IMPORTANT NOTE: It is recommended that
you operate the Wolf electric cooktop with
either a Wolf cooktop ventilation hood, down-
draft system or Pro ventilation hood. Contact
your Wolf dealer for details.
Cooktop Wall Hood – 30" (762) or 36" (914)
widths in classic stainless steel.
Cooktop Island Hood – 42" (1067) width in
classic stainless steel.
Downdraft Ventilation System –
30" (762), 36" (914) or 45" (1143) widths,
with top cover and control panel in classic,
platinum and carbon stainless steel
finishes—45" (1143) downdraft available
in classic finish only. Not for use with
Model CT30EU or Model CT36EU.
Pro Wall Hood – 22" (559), 24" (610) or
27" (686) depths and 30" (762) to 66" (1676)
widths in classic stainless steel.
Pro Wall Chimney Hood – 36" (914) to
54" (1372) widths in classic stainless steel.
Pro Island Hood – 36" (914) to 66" (1676)
widths in classic stainless steel.
Pro Hood Liner – available in widths to
accommodate 36" (914) to 60" (1524) hoods.
All hoods have welded seams, sealed halogen
lighting and removable, dishwasher-safe filters.
Blower requirements may vary due to the
length of ducting and number of angles. The
basic recommendation is 1 CFM per 100 Btu/hr
(1 kW equals 3,415 Btu/hr). Always consult
your HVAC professional for more concise
blower requirements.
IMPORTANT NOTE: When installing a ventila-
tion hood, refer to the specific requirements
of the hood for the minimum dimension to
countertop.
A C C E S S O R I E S
Optional acces-
sories are available
through your
Wolf dealer. To
obtain local dealer
information, visit
the Showroom
Locator section of
our website,
wolfappliance.com.