Weider WESY41080 - Manual (Page 16)

34. Route the Press Cable (88) around a 3 1/2Ó Pulley
(82). Attach the Pulley and a Cable Trap (80) to the
Press Frame (12) with a 3/8Ó x 3Ó Bolt (94), a 3/8Ó
Washer (38) and a 3/8Ó Nylon Jamnut (43).
Make sure the Cable Trap (80) is turned to hold
the Cable in place and that the Cable is between
the Pulley and the crossbar on the Press Frame.
35. Wrap the Press Cable (88) around a ÒVÓ Pulley (81).
Attach the ÒVÓ Pulley to the lower bracket on the Leg
Press Upright (4) with a 3/8Ó x 2Ó Bolt (50) and a 3/8Ó
Nylon Jam Nut (43).
36. Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82). Attach the Pulley and a Cable Trap (80) to the
Leg Press Arm (9) with the 3/8Ó x 4 1/2Ó Bolt (74).
Slide another 3 1/2Ó Pulley (82) with a Cable Trap (80)
onto the 3/8Ó x 4 1/2Ó Bolt (74). Hand tighten a 3/8Ó
Nylon Jamnut (43) onto the Bolt. Do not tighten the
Nylon Jamnut until step 38.
37. Wrap the Press Cable (88) around a ÒVÓ Pulley (81).
Attach the ÒVÓ Pulley and a Large Cable Trap (83) to
the bracket on the Front Seat Frame (8) with a 3/8Ó x
2 1/2Ó Bolt (65) and a 3/8Ó Nylon Locknut (42). Be
sure that the Large Cable Trap is turned to hold
the Cable in place and that the Cable and Pulley
move smoothly.
16
37
34
35
36
83
65
81
88
42
8
88
43
12
Crossbar
82 94
80
38
43
82
82
9
80
80
74
88
88
81
4
50
43