Sony SLV-SE210D - Manual (Page 12)

12 Connecting the VCR
Step 3 : Connecting the VCR
If your TV has a Scart (EURO-AV) connector, see page 13.
If your TV does not have a Scart (EURO-AV) connector
Note
• When you connect the VCR and your TV only with an aerial cable, you have to
tune your TV to the VCR (see page 14).
1 Disconnect the aerial cable from
your TV and connect it to IN
FRONT ANT. on the rear panel of
the VCR.
2 Connect OUT TO TV of the VCR
and the aerial input of your TV
using the supplied aerial cable.
AERIAL IN
Aerial cable (supplied)
OUT TO TV
: Signal flow
IN FRONT ANT.