Now you can operate your vcr, Quick start guide – Sony SLV-SE210D User Manual
Page 60
Sony Corporation
AC68-01375A
Quick Start Guide
1
Connecting the VCR
1
... Connect the aerial to IN FRONT ANT. of
the VCR.
2
... Connect OUT TO TV and the aerial input
of your TV using the supplied aerial cable.
3
... For better picture and sound, connect AV1
(EURO AV) to your TV using a Scart
cable if your TV has a Scart (EURO-AV)
connector.
2
Using the Auto Set Up function
1
...Turn on your TV and set it to the video
channel.
If your TV does not have a Scart (EURO-
AV) connector, tune the TV to channel 32
(the initial RF channel of this VCR). Refer
to your TV’s manual for TV tuning
instructions. If the picture does not appear
clearly, see “To change the RF channel.”
2
...Connect the mains lead to the mains.
3
...Press
M/m/</, to select a language,
then press OK.
4
...Press OK again.
5
...Press
M/m/</, to select your country,
then press OK.
When all of the receivable channels are
preset, the menu disappears from the TV
screen. You can rearrange the programme
position in any order (see “Changing/
disabling programme positions”).
After the search or download is complete,
the current time appears automatically. If
the time does not appear, set the clock
manually. See “Setting the clock.”
Now you can operate your VCR.
1
2
3
OUT TO TV
IN FRONT ANT.
l
: Signal flow
y
LINE-1 (TV)
AV1