Wharfedale L15T11W-A - Manual (Page 21)

Menu Operations
Function Menu Options Continued
4.DISPLAY MODE: To select the display mode between 4:3, 16:9 and
FULL SCREEN
5.BLUE SCREEN:To set On, the screen will be in blue screen after 3 seconds
if there is no signal.
6. RESET : Press V+ to reset the settings to the factory default .
7. CHILD LOCK: Press V+ to enter it and the following appears on the screen:
If password is correctly entered, the CHILD LOCK menu will be entered. If the
password is not correctly entered, you will be required to reenter the password
and the cursor will stay at the first place. CHILD LOCK menu is as follows:
(The initial password is 0000.)
PASSWORD:
- - - -
PASSWORD
CHILD LOCK OFF
CHILD LOCK
PASSWORD: The password can be changed. Press P+/- to select PASSWORD
and V+ to enter. The screen will display NEW PW: ----, then enter the new
password and the screen display CONFIRM PW: ----, if the same password
is entered correctly twice, the old password will be changed.
CHILD LOCK: Press P+/- button to select it. Press V+/- button to set on or off mode.
If lock on mode is set, child lock is inactivated automatically. In such case, buttons
on the television is useless and only buttons on remote control can be used, if child
lock button(button on the television) is pressed, the screen will display
CHILD LOCK. The child lock mode can be resumed by entering lock set menu,
set child lock on .
Customer helpline:0845 604 0105