Wharfedale L15T11W-A - Manual (Page 35)

SETUP
DVD System Setup
DVD System Setup
General Setup Process
1.Press the SETUP button, the
General Setup Page,Preference
Page will be displayed in turn.
2.Press CH+/- b to select, the
item, then press to enter the
submenu.
3.Press CH+/- bu to select then
press PLAY/ENTER to confirm.
4.Press SETUP repeatedly to
exit the set-up menus.
or
or
General Setup Page
When using the DVD with the internal TV,
select 4
3/LB.
The following information applies only
when the DVD output is connected to an
external TV.
4 3/PS (PS = Pan and Scan)
You may select this if you have a normal
aspect ratio (4:3) TV, although the NORMAL
/LB (letter box) is a more common choice. In
PS mode, widescreen material will fill the screen, but at the expense of
chopping off extreme left and right edges of the original film picture. For this
feature to work, the disc must be specially coded. Such discs are uncommon.
4
3/LB (LB = Letter Box)
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
16
9
You may select this if you have a widescreen (16:9) TV. Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
ASPECT RATIO DESCRIPTION
..General Setup Page..
Tv Display 4:3 LB
Angle Mark On
Osd Lang ENG
Caption On
Screen Saver Off 4 3/Ps
4 3/Lb
16 9
.
.
PAL
AUTO
NTSC
..Preference Page..
TV Type
Parental
Password
Default Auto
..General Setup Page..
4 3/Ps
4 3/Lb
16 9
.
.
TV Display 4:3 LB
Angle Mark On
OSD Lang ENG
Caption On
Screen Saver Off
PLAY/ENTER
SETUP
PLAY/ENTER
Customer helpline:0845 604 0105