weber 41995 - Manual (Page 54)

D-15
Problem Check Cure
Side Burner does not light.
Flame is low in HIGH position.
Push button ignition does not
work.
Is gas supply off? Turn supply on.
Is the fuel hose bent or kinked? Straighten hose.
Does burner light with a match? If match lights burner, checkigniter
(see below).
Side Burner Troubleshooting
(3)
Side Burner Grate
Side Burner Cap
Side Burner Ring & Head
Igniter Electrode
Control Knob
(2)
(1)
If problems cannot be corrected by using these methods, please contact the Customer
Service Representative in your region using the contact information sheet provided with
your manual.
Side Burner maintenance
ƽ WARNING: All gas controls and supply valves
should be in the OFF position.
Make sure wire is connected between the igniter and
electrode. Adjust igniter electrode to burner. Gap
should be 1/8 to 3/16 inch from tip of electrode to
burner. Spark should be a white/blue color, not yellow.
1) Igniter Wire
2) Venturi/Burner
3) 1/8 to 3/16 inch gap between electrode
and burner