weber 41995 - Manual (Page 60)

E-5
Maintenance
Crossover ® Ignition System Operations
If the Crossover ® ignition system fails to ignite the LEFT
burner in a burner set, light the LEFT burner with a match.
If the LEFT burner lights with a match, then check the
Crossover
® ignition system.
• Check that both ignition wires(1,2) are attached
properly.
• Check that the Crossover ® ignition button is activating.
• Replace battery with a like brand battery.
• You should hear the igniter sparking.
If the Crossover ® ignition system still fails to light, contact
the Customer Service Representative in your region using
the contact information sheet provided with your manual.
Replace Igniter Batteries
Parts required: 1 AA alkaline battery per igniter.
Unscrew igniter button from top of control panel. Remove
igniter button and contact spring. Remove old battery and
replace with a new AA alkaline battery. Positive end(1) of
battery faces up as shown in illustration. Replace spring
contact(2) and screw igniter button(3) back down.
(1)
(2)
(2)
(1)
15. To reinstall the manifold assembly, reverse steps 7
through 14.
ƽCAUTION: The burner openings (1) must be posi-
tioned properly over the
valve orifices (2).
Check proper assembly before fastening manifold in
place.
ƽWARNING: After reinstalling the gas lines, they
should be leak checked with a soap and water
solution before using the grill. (See, “Check for gas
leaks.”)