Ommon washing problems, Cont, Troubleshooting – Whirlpool 6LSR7244EQ0 User Manual
Page 14
14
TROUBLESHOOTING
C
OMMON WASHING PROBLEMS
(
CONT
.
)
Solution...
•
Sort lint givers (towels, chenille) from
lint takers (corduroy, synthetics). Also
sort by colour.
•
Lint can be trapped in load if over-
loaded. Wash smaller loads.
•
Clean out pockets before washing.
•
Use enough detergent to hold lint
in water.
•
Use wash water warmer than
21°C (70°F).
•
Use wash water warmer than
21°C (70°F).
•
Loads should move freely during
wash. Wash smaller loads.
•
Do not pour liquid bleach directly on
load. Wipe up bleach spills. Undiluted
bleach will damage fabrics.
•
Clean out pockets before washing.
Zip zippers before washing.
•
Mend rips and broken threads in
seams before washing.
•
Dilute fabric softener and add to
rinse portion of cycle only. Do not
drip fabric softener on clothes.
•
Install an iron filter.
•
Use enough detergent to remove soil
and hold it in suspension.
•
Sort dark clothing from whites and
lights.
•
Unload the washer as soon as it
stops.
•
Unload the washer as soon as it
stops.
•
Use the Permanent Press cycle or
another cycle with low spin speeds
to reduce wrinkling.
•
Loads should move freely during
wash. Wash smaller loads.
•
If safe for fabric, use warm or hot
wash water. Use cold rinse water.
•
Reverse hoses.
Cause...
•
Improper sorting.
•
Overloading.
•
Paper or tissue in pockets.
•
Not enough detergent.
•
Detergent not dissolving.
•
Wash water colder than 21°C (70°F).
•
Overloading. Improper use of washer.
•
Improper use of liquid bleach.
•
Sharp items not removed from pockets;
fasteners not fastened.
•
Items damaged before washing.
•
Improper use of fabric softener.
•
Iron (rust) in water.
•
Not enough detergent used, causing
soil to be redeposited.
•
Dye transfer due to not sorting loads
properly.
•
Dye transfer due to not unloading
washer promptly.
•
Not removing load promptly.
•
Wrong cycle for fabrics being washed.
•
Overloading.
•
Wash water not warm enough to relax
wrinkles. Use warm rinses.
•
Hoses reversed.
Problem...
Residue or lint
on load
Tearing
Stains on load
Load is wrinkled