White Outdoor Z - 180 - Manual (Page 7)

7
SECTION 4: CONTROLS
Figure 3
HOUR/RPM METER
The hour/RPM meter is an LCD (liquid crystal display) display that is located on the Right Control Panel. The
meter’s display stays on continuously. (See Figure 3)
• HOUR METER: The meter functions as an hour meter. The hour value is the number of hours of engine
operation. Use the hour value to determine when maintenance is required and to cost jobs.
• RPM METER: When the engine is on, the meter functions as an engine RPM gauge.
POWER TAKE-OFF (PTO) SWITCH
Figure 4
The PTO switch is located on the Right Control Panel. (See Figure 4) It controls the engagement of the cutting
blades. When the switch is:
• UP: The cutting blades are engaged (blades are turning).
• DOWN: The cutting blades are disengaged (not turning).
Front
Hour/RPM Meter
Ignition/Light Switch
PTO Switch
Right Control Panel
Lift Handle
ON
OFF
Top View
Pull Up
Push Down