iRiver Story HD - Manual (Page 8)

Power On
G e t t i n g S t a r t e d 0 8
1. Turn on the device and computer.
2. Upon connecting the device to your computer, you will see the
screen where you can select the connection mode.
- Charge Battery: The device is currently being charged.
- Connect Removable Disk: The connection between the device and
a computer has been established for file transfer.
Connecting to your computer
Connecting the Story HD
Do not use any other cables other than the USB cable provided with the
product. It could cause the product to malfunction.
For a successful computer/USB connection, please disable all computer
or device functions. Please verify that the product is connected to a
high-powered, USB 2.0 port. Some low-powered USB ports built into
certain peripheral devices, such as certain types of keyboards and USB
hubs without internal power may not provide sufficient amount power to
charge the product.
1. Safely disconnect the product from your computer by clicking the
icon on the taskbar of the computer screen.
2. Confirm that the device is disconnected by clicking [Confirm].
Disconnecting the device