Weider WESY2966.0 - Manual (Page 15)

15
CABLE DIAGRAM
The cable diagram shows the proper routing of the
Long Cable (42). Use the diagram to make sure
that the cable has been assembled correctly. If the
cable has not been correctly routed, the resistance
system will not function properly and damage may
occur. The numbers show the correct route for the
cable.
7
10
8
9
4
5
6
1
2
Long Cable (42)
3
ATTACHING THE LEG LEVER
To use the Leg Lever (9), first attach the seat to the
resistance system (see ADJUSTING THE SEAT on
page 13). Then, attach the pulley housings to the
low pulley station (see ATTACHING THE PULLEY
HOUSINGS on the previous page). Finally, attach
the Short Cables (43) to the Leg Lever with two
Clips (29).
43
29
29
9