Wren Associates DRS5016 - Manual (Page 105)

Basic Configuration DRS5116
Wren
2003. 09. 06 (v 1.0) 105
16.8.8. Miscellaneous
<Button control>
- Press the [MENU] button and select “Miscellaneous” below the “System” tab.
Remote Control ID
Up to sixteen DRS units can be controlled with a single IR Remote Control. Designate each unit with a
unique number under the ‘Remote Control ID’ menu. When not using remote controller, set it as “Off”.
<How to set remote controller
>
- Aim the remote controller at the DRS5116.
- Press the “ID” button of the remote controller until the DRS reacts.
- If the remote controller’s ID agrees with the DRS, all the LEDs on the front panel of the DRS will
light up and a buzzer will sound.
- OSD menus can now be set with the remote controller.
- For more information, please refer to the “ DRS Installation Guide”.
Keyboard Control Addr
This function is used to set the keyboard’s control address in order to operate all DRS5116’s menus with a
keyboard. The default value is “32”. If several DRS5116s are connected with one keyboard, it can be