Wren Associates DRS5016 - Manual (Page 48)

Installation and Connection DRS5116
Wren
2003. 09. 06 (v 1.0) 48
10. Connecting External Storage
10.1. IEEE1394 Port
DRS5116 series have two IEEE1394 ports for external storage device interface. With them, the DRS
series can expand storage capacity up to 4TB.
<Note>
Some IEEE1394 bays may not be recognized by the DRS series. Before purchasing, consult the local
distributor.
10.2. Connecting IEEE1394 Device
When using FireWire supported by external HDD, hard drive bays can be connected to one port in the
front panel or one port in the rear panel. The DRS series does not supply power to the hard drive bay;
therefore only bays that use external power can be used.
<Note>
The DRS series detect external HDD, even though DRS series run. If not, it is recommended to
connect as follows.
1. Power off the DRS.
2. Connect external HDD to IEEE1394 port.
3. Power on external device.
4. Power on the DRS.