Weider WEBE11920 - Manual (Page 14)

M8 x 55mm Bolt (38)
M10 Washer (6)
M8 Nylon Locknut (34) M10 Nylon Locknut (11)
M10 x 180mm Bolt (35)
M10 x 70mm Bolt (31)
M6 Washer (36)
M8 Washer (41)
M10 x 60mm Carriage Bolt (32)
M6 x 16mm Screw (30)
M6 x 36mm Screw (37)
Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small
parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-
attached.
PART IDENTIFICATION CHART