Weider WEBE96490 - Manual (Page 15)

15
ATTACHING WEIGHTS TO THE LEG LEVER
To use the Leg Lever (18), slide the desired amount of
weight onto the weight tube.
SETTING UP THE BENCH FOR SQUAT EXERCISES
When performing squat exercises, place the Small Weight
Rests (26) into one set of adjustment holes on the two
rear Uprights (25 and 60).
18
ADJUSTING THE BACKREST
The Backrest (15) can be adjusted to a level position and
several decline and incline positions.
To increase the incline of the Backrest (15), simply pull up
on the Backrest until the tube on the Backrest Adjustment
Bracket (39) locks into the desired tab on the Bench
Frame (5). To decrease the incline, pull up slightly on the
Backrest, swing out the Backrest Adjustment Bracket and
then lower the Backrest until the Adjustment Bracket locks
into the desired tab on the Frame
39
Tube
5
Adjustment Tab
Weight Tube
15
26
25
60
26
WARNING: Do not place more than 150 pounds on
the Leg Lever. Always secure the weights with the
weight clips when you have mounted them on the
leg lever.
WARNING: Always make sure the tube on the
Backrest Adjustment Bracket is securely locked
into one of the adjustment tabs on the Bench
Frame before putting any weight on the Backrest.
WARNING: Always move the bench when you are
performing standing exercises in the cage.