Wybron PS-150 - Manual (Page 12)

12
Note: Use the supplied thumb screws to clamp the hanger brackets to the desired pipe
or truss.
Power supply rack mounting
The rack mount accessory can be used with up to two power supplies and allows them
to be mounted into a 19-inch rack.
Follow these steps to install the power supply into the rack mounting tray.
1. Disconnect AC power from the power supply.
2. Place the rack mount tray right side up on a flat surface.
3. Position the power supply in the rack mount tray as shown below.
4. Attach the power supply to the rack mount tray using the supplied screws.
Note: The cover plate may be removed to allow installation of a second power supply.
90 -
25
0
V A
C
50
/ 60
HZ
4 AM
P
SL
O
-
B L
O
AT
11
5
V A
C 2
AM
P
SL
O
-
B L O
AT
23
0
V A
C
Power Supply Hanger Brackets
Rack Mount Tray
screws