Wybron PS-150 - Manual (Page 4)

4
Safety Information
SAVE THESE INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
This manual gives step-by-step instructions for the preparation, setup, and operation of
the PS-150, PS-300 and PS-600 Power Supply.
There is a potential risk of fire, electric shock or injury to persons if the product is not
used as instructed.
WARNING: When using electrical appliances, use basic precautions, including:
• Read this manual before connecting power.
• Use supervision around children.
• Use in a dry location only.
The PS Power Supply is to be used in an indoor environment only and is not intended
for residential use.
For continued protection against risk of fire, replace only with same type and rating of
fuse.
Protection against electric shock is assured only if the mains connected power supply
cord set is connected to a properly earthed grounding type receptacle.
An all pole disconnect device must be located adjacent to the unit or, if the AC cord is
used as the main disconnect device, ensure that the socket-outlet is located/installed
near the equipment and is easily accessible.
THE MAINS LEADS ARE COLORED IN ACCORDANCE WITH THE FOLLOWING
CODE AND MUST BE CONNECTED IN THE FOLLOWING SCHEME:
- GREEN AND YELLOW: EARTH
- BLUE: NEUTRAL
- BROWN: LINE
WARNING: THIS EQUIPMENT MUST BE EARTHED.
For questions, contact Wybron at 1-800-624-0146 or visit www.wybron.com.
Product Modification Warning
Wybron, Inc. products are designed and manufactured to meet the requirements of
United States and International safety standards. Modifications to the products could
affect safety and render the product non-compliant to relevant safety standards.