Wayne-Dalton ALUMINUM FULL VIEW 452 - Manual (Page 2)

A
LUMINUM
F
ULL-
V
IEW 451 & 452
SECTIONAL DOOR SYSTEMS
www. wayne-dalton .com/commercial
2-1⁄4" integrat-
ed reinforcing
rib on upper
intermediate rail
for doors 10'3"
wide and over.
Aluminum glazing stop.
Flexible vinyl bottom door seal.
Durable smooth aluminum panels
(color matches rail, glass in bottom section
not recommended).
1- 3⁄8" thick
section
with special
reinforcing design.
Choice of colors 6063-T6 aluminum alloy,
204-R1 clear satin anodized finish.
Vinyl seal
between
sections.
Large glass
panels allow
maximum light
& visibility.
Perfectly suited for applications where maximum
light and visibility are desired, Wayne-Dalton’s
Aluminum Full-View doors help create a pleasant
interior environment while offering a warm and open
look from the exterior. Aluminum Full-View doors
feature an aluminum bottom section with three to
seven clear upper sections, depending upon size.
Model 451
Glazed with 1 /
8
" DSB glass held in place with
aluminum molding and sealed with butyl glazing tape,
the Aluminum Full-View 451 is ideal for applications
up to 16'2" x16'1". Acrylic (plexiglass) or polycarbonate
(lexan) panels, in thicknesses of 1 /
8
" and 1 /
4
" can be
substituted for DSB glass.
Model 452
Ideal for larger installations and applications where
insulation and durability are important,theAluminum
Full-View 452 features 1 /
2
" insulated SSB glass,held in
place with aluminum molding and sealed with butyl
glazing tape. Alternative glazing options include 1 /
4
"
thick plate and wire polished glass.
Materials & Construction
Aluminum Full-View doors are manufactured using
high-quality materials for excellent durability. All
stiles and rails are extruded aluminum alloy 6063T6
and feature a beveled edge around panels. Stiles and
rails can be clear anodized (standard) or finished with
white or brown powder coat finish. Tracks and
hardware are manufactured from hot-dipped
galvanized steel, and the doors feature vinyl seals
between sections and on the bottom of the door.
Contact Wayne-Dalton for additional sizes and
colors.
Finishes
• Clear Satin Anodized (standard)
• Bronze Anodized
• Black Anodized
•White/Brown Acrylic
• Custom Powder Coat