Welch Allyn SCANTEAM 6980 - Manual (Page 13)

8 SCANTEAM 6980 User’s Guide
Dip Switch Feature Selection
Parameter
RSĆ232 Type
Data Bit and
Parity
Setting
SW 1
Configurations
8 Bit None
ON*
SS, ES Code Setting
SW 3
Enabled
OFF*
Disabled
ON
RSĆ232 Type
Baud Rate
Setting
SW 4
Check Sum Setting
SW 6
Disabled
OFF*
Enabled
ON
STX, ETX, DLE Setting
SW 7
Enabled
ON*
Disabled
OFF
Mode Setting
SW 8
Normal Operating
ON*
Programming
OFF
SW 5
➁
SW 2 ON* OFF ON OFF
Reserved
OFF
7 Bit Even
ON
7 Bit Odd
OFF
1200
ON
ON OFF* ON OFF
2400
OFF
9600
ON*
19200
OFF
Notes:
➀
Asterisk (*) Indicates Factory Default Setting.
➁ Data Format includes one Start Bit and one Stop Bit.
Configuration Options: Program Mode Download Controlled
The SCANTEAM 6980 Magnetic Stripe Reader has two
operating modes: Normal Operation and Programming.
In Normal Operation mode, everything typed on a connected
keyboard is passed to the host PC directly. A program utility is
required for Programming mode. The utility will monitor the
keys pressed and program the MSR via the RSĆ232 port. The
green LED will flash and the MSR will beep as each command
key is typed during programming.