Westinghouse L1920NW - Manual (Page 9)

1. The following frequency range is the working period. If the entered mode between below
period but not match the frequency of supported timing, display optimization would not be
assured. If the entered mode is out of the working period, the display will be blanking
(just show “INPUT SIGNAL OUT OF RANGE”) then go to power saving.
2. Basically, mode judgment is regardless the sync polarity except both or more modes that
are all belong to the supported timing list and could be judged by sync polarity only.
3. In the meantime, real entered frequency of the supported timing is not requested exactly.
4. Normalization of VGA card’ s deviation will be acceptable.
5. Horizontal Frequency 31 ~ 82KHz
6. Vertical Frequency 56 ~ 76Hz
- 7 -
Technical Features and Specifications
Interface Frequency
Net
Net
Tilt Angle
Analog
Digital
Operating
Condition
Storage
Condition
D-sub
DVI-D(Optional)
-5°~15°
About 3.4kg
About 4.2kg
AC
Consumption
AC 100~240V,50Hz/60Hz,1.2A
Temperature
Humidity
Altitude
Temperature
Humidity
Altitude
Active:<25W/Standby:<1W
0°C to 40°C
-20°C to 60°C
20% to 90%
0~10,000 ft.
10% to 90%
0~40,000 ft.
Panel
Display Size
Pixel Pitch
Connector
Tilt
Weight
Power
Dimensions
(W x H x D)
Active:<55W/Standby:<2W
Item Description
18.5"
21.6"
18.5"
21.6"
18.5"
21.6"
0.300(H) x 0.300(V)mm
409.8(H) x 230.4(V)mm 18.5"
21.6"
21.6"
18.5"
0.248 (H) x 0.248 (V)mm
477.5 (H) x 268.6 (V)mm
About 440(W)x35 9(H)x195(D)mm
About 5
10(W)x392(H)x195(D)mm