Weider WESY5993.2 - Manual (Page 20)

M6 Black Nylon
Locknut (69)
M4 x 12mm Flat
Head Screw (85)
M6 x 45mm Screw (58)
3/8” Washer (75)
#8 x 3/4” Screw (62)
#8 x 3/4” Tec Screw (60)
#8 x 3/8” Screw (107)
M6 x 16mm Screw (82)
5/16” x 1” Button Bolt (46)
3/8” x 1” Button Bolt (87)
3/8” Nylon Locknut (76)
3/8” Nut (47)
5/16” Nylon Locknut (65)
3/8” x 1 1/2” Button Bolt (71)
3/8” x 3” Button Screw (70)
3/8” x 4” Button Bolt (24)
3/8” x 4 1/2” Button Bolt (40)
3/8” x 2 3/4” Carriage Bolt (83)
3/8” x 5 1/2” Carriage Bolt (73)
3/8” x 2 3/4” Bolt (64)
3/8” x 4 1/4” Bolt (81)
3/8” x 5 1/2” Bolt (66)
1 1/2” x 2 1/2” Inner Cap (41)
1” Square Inner Cap (54)
2” Square Inner Cap (54)
2 1/4” Round Outer Cap (27)
2” Round Inner Cap (57)
1 3/4” Round
Inner Cap (56)
1 1/2” Round Inner Cap (38)
1 1/4” Round Inner Cap (78)
3/4” Spacer (17)
7/8” Spacer (106)
5/16” Washer (59)
3/8” Split Washer (103)
5/16” Split Washer (52)
1 1/4” Round Inner Cap (78)
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on the reverse side of this page. Important: Some
parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags,
check to see if it has been pre-assembled.