Wells HDW-2 - Manual (Page 12)

CLEANING INSTRUCTIONS
10
PRECAUTIONS: Disconnect appliance from electric power.
Allow unit to cool before proceeding.
FREQUENCY: Minimum -Daily
TOOLS: Mild Detergent
Clean cloth or sponge
1. Disconnect warmer from electric power. Allow to cool before
cleaning.
2. Remove product pans from drawers. Remove drawers from
warmer.
3. Place a suitable container under drain, remove drain cap and drain
water pan. Discard drain water. Remove water pan (see page 6)
and drip tray.
4. Clean drawers, product pans, water pan and drip tray by wiping
with a soft cloth dampened with water and mild detergent.
Rinse all components thoroughly with a soft cloth dampened with
clear water.
Dry all components prior to reinstalling them in warmer.
5. Sweep crumbs and other debris from warmer cavity.
6. Clean the outside of the unit by wiping with a clean cloth or
sponge dampened with warm water and mild detergent.
Dry with a clean cloth, then wipe with a polish formulated for
stainless steel.
7. It is important to keep the slide rails clear and free from debris.
Periodic cleaning of the slide rails and other adjoining parts is
necessary to assure smooth drawer operation.
8. Check drawer rollers. Be sure they roll freely are free from debris.
9. Reinstall water pan (see page 6) drip tray, drawers and product
pans. Reinstall drain cap on water pan and add water to water pan
to 1/2" from top.
Procedure is complete CAUTION:
ELECTRIC SHOCK
HAZARD
Disconnect appliance from
electric power before cleaning.
CAUTION:
HOT SURFACE
Exposed surfaces can be hot
to the touch and may cause
burns. Allow appliance to cool
before cleaning.
IMPORTANT: DO NOT spill
or pour water into controls,
control panel or wiring.
DO NOT submerge drawer
frames in water. Water
damage is not covered by
warranty.
IMPORTANT: DO NOT use
steel wool or abrasive
cleansers to clean the warmer,
drawers or drawer rollers.