Weider WESY92190 User Manual
Page 21
21
ATTACHING THE LAT BAR, ROW BAR, AB STRAP OR
HANDLE TO THE LOW, HIGH OR AB PULLEY
STATION
Attach the Lat Bar (76) to the Low Cable (9) with a Cable
Clip (73). For some exercises, the Chain (74) should be
attached between the Lat Bar and the Low Cable with
two Cable Clips. Adjust the length of the Chain
between the Lat Bar and the Cable so the Lat Bar is
in the correct starting position for the exercise to be
performed.
The Row Bar (70), Handle (75) or Ab Strap (81) can be
attached in the same manner.
Use the same method for attaching any of the attach-
ments to the high pulley station or the ab station. (See
page 4.)
76
9
74
73
75
81
70
USING THE CURL POST
Some exercises require that the Curl Post (10) be
removed. To remove the Curl Post, loosen the 5/16Ó x 2Ó
Knob (72). Slide the Curl Post off of the Seat Frame (36).
To reattach the Curl Post (10), slide the Curl Post onto
the Seat Frame (36) so each of the welded brackets is
between the Seat Frame and the bracket on the Leg
lever (29). Secure the Curl Post with the 5/16Ó x 2Ó Knob
(72).
Make sure the Leg Lever (29) can be turned freely
after the Curl Post (10) is mounted.
36
29
10
72
Welded
Brackets