Weider 831.159833 - Manual (Page 10)

10
13. Slide six Weights (41) onto the Right Weight
Guides (26). Make sure the Weights are turned
so the pin grooves are on the bottom.
Press a Weight Tube Bumper (45) into the lower
end of the Short Weight Tube (44). Slide the
Short Weight Tube into the center holes in the
Weights (41).
Lubricate the indicated holes in a Top Weight (42)
with grease. Slide the Top Weight onto the Right
Weight Guides (26). Note: Make sure the Top
Weight is turned so the groove fits over the
welded pin on the Short Weight Tube (44).
42
44
26
41
45
Pin
Grooves
Welded
Pin
13
14
14. Slide the Bottom Weight (47) and seven Weights
(41) onto the Left Weight Guides (27). Make sure
the decal on the Bottom Weight is in the indi-
cated location and the Weights are oriented
with the pin grooves on the bottom.
Press a Weight Tube Bumper (45) into the lower
end of the Long Weight Tube (43). Slide the Long
Weight Tube into the center holes in the Weights
(41).
Lubricate the indicated holes in the other Top
Weight (42) with grease. Slide the Top Weight
onto the Left Weight Guides (27). Note: Make
sure the Top Weight is turned so the groove
fits over the welded pin on the Long Weight
Tube (43).
27
Welded
Pin
Pin
Groove
42
41
43
45
47
Lubricate
Lubricate
Decal