Wells H-006UL User Manual
Page 3
WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION 3
INSTALLATION 4
OPERATION 5
CLEANING INSTRUCTIONS 5
EXPLODED VIEW AND PARTS LIST 6
PARTS & SERVICE 7
CUSTOMER SERVICE DATA 7
Thank You for purchasing this Wells Manufacturing Co. appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it
gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for the
appliance in a manner which will ensure its optimum performance.
TABLE OF CONTENTS
SPECIFICATIONS
INTRODUCTION
1
ELECTRICAL SPECIFICATIONS
MODEL
VOLTS
WATTS
AMPS
FIELD WIRING
H-006UL
120 VAC 1ø
70
0.6
2 wire (L1, Neutral) + Gnd
14 AWG Copper 90ºC
MINIMUM CLEARANCES REQUIRED
UNIT-TO-NEAREST SURFACE
BACK
SIDE
BOTTOM* FRONT**
1"
25 mm
1"
25 mm
8"
203 mm
2-1/4"
57"
* If storage is to be used beneath unit, a
baffle must be placed 8" beneath the
hotplate to prevent contact.
** Front of counter to cutout.
If control box is placed directly beneath the
hotplate, clearance may be 1".