Manual shut-off valve, hose and regulator assembly, Fig. 5 – White Outdoor FUEL HD120 User Manual
Page 13
HEAT
POWER CORD
SELECTOR SWITCH
VENT
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
BLACK
BLA
CK
BLA
CK
BLA
CK
BLA
C
K
BLA
CK
BLACK
GREEN
JUMPER
TERMINAL
STRIP
CONTR
OL PO
WER
VENT
CONTR
OL PO
WER HEA
T
GR
OUND
7
6
5
4
3
2
1
NEUTRAL(S) FROM
CONTROL POWER
VENT MODE
CONTACTS
HEAT
POWER CORD
SELECTOR SWITCH
VENT
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
BLACK
BLACK
WHITE
BL
ACK
BL
ACK
BL
ACK
BL
ACK
BL
ACK
BL
ACK
BLACK
GREEN
JUMPER
TERMINAL
STRIP
FROM CONTROLLER
TO CONTROLLER
GROUND
7
6
5
4
3
2
1
BL
ACK
12
VENT MODE
-- Remove black lead at terminal 4 to selector switch.
-- Add contacts at terminals 1 and 4.
E. Heat-VVent B
Building C
Control C
Connections
(Using PPowered C
Contacts)
-- Remove jumper at terminals 1 and 2.
-- Remove black leads at terminals 3 and 4 to selector
switch.
-- Remove white leads at terminal 6 to selector switch.
-- Add neutral(s) of control contacts at terminal 5.
HEAT MODE
-- Add control power at terminal 3.
VENT MODE
-- Add control power at terminal 4.
MANUAL SHUT-OFF VALVE, HOSE
AND REGULATOR ASSEMBLY
REGULATOR
NIPPLE
VALVE, MANUAL
SHUT-OFF
GAS HOSE
ADAPTER
SEDIMENT TRAP
TO CONTROL
VALVE INLET
REGULATOR VENT
GAS FLO
W
1. Always use approved pipe thread compound suitable
for use with L.P. gas or natural gas on the threaded
connections.
2. Assemble the components together according to the
figure. This view is to show general assembly of the
components only. The regulator must always be
mounted so its vent, regardless of location on the
regulator, is always pointed downward.
3. Tighten all connections securely and check for gas
leaks.
FIG. 5
SECOND STAGE
REGULATOR