Side burner ignition & usage – weber Summit 56221 User Manual

Page 19

Advertising
background image

WWW.WEbER.com

®

19

SIDE bURNER IGNITIoN & USAGE

off

start/hi

low

side burner iGnition

m danGer

failure to open the lid while igniting the side burner, or not
waiting 5 minutes to allow the gas to clear if the side burner
does not light, may result in an explosive flare-up which can
cause serious bodily injury or death.

m warninG: Check hose before each use of barbecue for

nicks, cracking, abrasions or cuts. if the hose is found to
be damaged in any way, do not use the barbecue. replace
using only weber

®

authorized replacement hose. Contact

the Customer service representative in your area using the
contact information on our web site.
log onto www.weber.com

®

.

A) Open the side burner lid

(1) .

B) Check that the side burner valve is turned off (Push control knob in and turn

clockwise to ensure that it is in the OFF position), turn all burners not being used to
the OFF position (push in and turn clockwise)

(2) .

C) Turn the gas supply valve on

(3) .

D) Push down and turn the side burner control valve to HI

(4) .

E) Press the igniter button several times so it clicks each time until you see a flame

(5) .

m Caution: side burner flame may be difficult to see on a

bright sunny day.

m warninG: if the side burner does not light in five seconds:

a) turn off the side burner control valve, main burners

and gas supply at source.

b) wait 5 minutes to let the gas clear before you try

again, or try lighting with a match (see “side burner
manual iGnition”).

3

1

2

5

2 4

Advertising