Weider 8530 - Manual (Page 12)

12
23. Route the Long Cable (72) around the 3 1/2Ó
Pulley (15) on the Top Frame (55). Tighten
the 3/8Ó Nylon Locknut (21) and the 3/8Ó x 2Ó
Bolt (not shown).
See inset drawing. Wrap the Long Cable (72)
around a 3 1/2Ó Pulley (15). Attach the Pulley
and a Cable Trap (66) to the bracket on the
Stabilizer (5) with a 3/8Ó x 2Ó Bolt (12) and a
3/8Ó Nylon Locknut (21). Be sure that the
Cable Trap is turned to hold the Cable in
place.
24. Wrap the Long Cable (72) around a 3 1/2Ó
Pulley (15). Attach the Pulley and a Cable
Trap (66) to the Squat Arm (84) with the 3/8Ó
x 2 1/4Ó Bolt (94) and a 3/8Ó Jam Nut (92). Be
sure that the 3/8Ó Jam Nut is on the side
shown and that the Cable Trap is posi-
tioned to hold the Cable in place.
23
24
CABLE ASSEMBL
Y
55
15
5
72
21
21
15
Bracket
84
66
92
94
72
15
72
15
21
5
66
12