Features & operating controls (continued) – Wells WVAE-30F User Manual

Page 5

Advertising
background image

FEATURES & OPERATING CONTROLS (continued)

3

v.7

FUSIBLE LINK LOCATION

FUSIBLE LINKS provide fire protection by melting at a pre-set temperature
and activating the fire suppression system.

v.8

FIRE SUPPRESSION
NOZZLE(S)

Disperse the fire suppression media.

f.9

FILTER PUMP MOTOR
OVERLOAD RESET

Provides over-temperature protection for the FILTER PUMP MOTOR.
Reset manually by pressing the red button.

v.10 VENTILATOR EXHAUST

COLLAR

Ventilator discharge. DO NOT BLOCK.
Contains fire damper with pre-installed 285ºF (141ºC) fusible link.

v.11
v.12
v.13

CHARCOAL FILTER
HEPA AIR FILTER
GREASE BAFFLE


See page 10.

v.14 ANSUL® SYSTEM STATUS

INDICATOR

Indicates status of Ansul® fire suppression system
(i.e. COCKED or FIRED).

v.15 ACCESS TO AUTOLIFT

MOTOR

On fryers with automatic basket lifting device (WVAE-series) allows
servicing of lift mechanism.

v.16 MANUAL PULL STATION

Allows manual discharge of fire suppression system. Shown on left side,
may also be mounted on right side. IMPORTANT: PULL STATION must
be field installed by an ANSUL® technician.

v.17 GREASE CUP

Catches drippings from GREASE BAFFLE.

f.18 DRIP PAN

Catches any liquid draining from top of fryer section.

f.19 STABILIZER

Prevents unit from tipping backwards.

f.20 RIGID (REAR) CASTERS

Allows unit to be easily positioned by slightly lifting front of unit.

IMPORTANT

If a remote pull station is installed, both rear casters must be replaced with fixed legs in order to deter movement of

unit. MOVING AN APPLIANCE EQUIPPED WITH A REMOTE PULL STATION WILL DISCHARGE THE FIRE

SUPPRESSION SYSTEM.

f.21 FIXED (FRONT) LEGS

Allows the unit to be leveled.

f.1

POWER SWITCH
(FILTER-OFF-FRYER)

FRYER position energizes VENTILATOR POWER LIGHT and BLOWER.
If, within 10 seconds, there is sufficient airflow for proper operation,
POWER LIGHT will remain ON and fryer will operate.

v.2

VENTILATOR POWER LIGHT
(green)

Glows when FRYER POWER SWITCH in pressed to FRYER and adequate
airflow has been proven.

v.3

CHECK FILTERS LIGHT
(amber)

Glows when GREASE BAFFLE and/or HEPA FILTER are not properly
installed. When this light is lit, fryer is disabled.

v.4

REPLACE FILTERS LIGHT
(amber)

Glows if either CHARCOAL FILTER or HEPA FILTER are due for
replacement. Fryer will continue to operate, but filters must be changed in
a timely manner before they clog and disable the fryer.

v.5

SERVICE REQUIRED LIGHT
(red)

Glows when there is insufficient airflow for proper operation (either
CHARCOAL FILTER or HEPA FILTER, or both, plugged). When this light
is lit, fryer is disabled.

v.6

VENTILATOR BLOWER

Provides ventilation airflow.

ITEM DESCRIPTION

FUNCTION

M3

8

1

301603

O

p

M

(

S

up

p

lem

en

ta

l)

N

F

P

A

H

o

o

d

Advertising
This manual is related to the following products: