Wyse Technology WintermTM 9000 - Manual (Page 25)

5
Mounting and Connecting the Terminal
The Quick Start Guide included in the shipping carton provides instructions for mounting
and connecting the terminal. The terminal may be placed on a desktop, or it may be
mounted on a wall using an optional wall-mount bracket available from Wyse Technology.
Caution
Mount and connect the terminal only as directed in the Quick Start Guide
(and in the wall-mount bracket instructions if used). Be sure that there is
sufficient space around the terminal for ventilation. Follow all precautions
listed in the Quick Start Guide.
Note
On the Model 9235LE the amber power LED may stay on for up to a minute
after plugging power into the unit. The user should not press the power
button to boot up until the amber light goes out.
The following items are provided in the box with each terminal and should be used with
the installation:
• Keyboard and mouse (may or may not be included)
• Power cord (may or may not be included)
• Power supply
• Noise suppressor (ferrite bead)
• Desktop mounting stand (if required)
• Quick Start Guide
Caution
To ensure regulatory compliance, use only the power supply included in the
shipping carton, or a Wyse-approved equivalent, with the terminal. Also, the
noise suppressor (ferrite bead) included in the box with the terminal must be
installed on the network cable as described in the accompanying
instructions. Refer to the regulatory notices in the front matter of this
document for details.
Note
A 3-button wheel mouse may be used.