Zanussi ZI 9454 X - Manual (Page 18)

18
• Close the door again and check that it is
positioned at the requested height. If necessary,
use the adjustment screws situated above the
fixing bracket and the hinge.
• Use the same adjustment screws to align the
doors vertically.
• Check horizontal alignment of the outer door
panels and, if necessary, correct their position by
moving them along the slots.
• Open the door.
Adjust the alignment of the front face of the outer
door panels by means of the brass insert in the
door mounting brackets.
• Once the door panels are perfectly aligned, fix a
clamp screw inside the upper and lower hinge on
the lower bracket. The screws must be tighten
completely inside the slots.
Adjustment panels (if necessary)