3 main window, 4 status bar, 3 main window 2.2.4 status bar – ZyXEL Communications P-2602HW(L) Series User Manual

Page 55

Advertising
background image

P-2602H(W)(L)-DxA Series User’s Guide

Chapter 2 Introducing the Web Configurator

55

2.2.3 Main Window

The main window displays information and configuration fields. It is discussed in the rest of
this document.

Right after you log in, the Status screen is displayed. See

Chapter 6 on page 83

for more

information about the Status screen.

2.2.4 Status Bar

Check the status bar when you click Apply or OK to verify that the configuration has been
updated.

Remote MGMT WWW

Use this screen to configure through which interface(s) and from which IP

address(es) users can use HTTP to manage the ZyXEL Device.

Telnet

Use this screen to configure through which interface(s) and from which IP

address(es) users can use Telnet to manage the ZyXEL Device.

FTP

Use this screen to configure through which interface(s) and from which IP

address(es) users can use FTP to access the ZyXEL Device.

SNMP

Use this screen to configure your ZyXEL Device’s settings for Simple

Network Management Protocol management.

DNS

Use this screen to configure through which interface(s) and from which IP

address(es) users can send DNS queries to the ZyXEL Device.

ICMP

Use this screen to set whether or not your device will respond to pings and

probes for services that you have not made available.

UPnP

General

Use this screen to turn UPnP on or off.

Maintenance

System

General

Use this screen to configure your device’s name, domain name,

management inactivity timeout and password.

Time Setting

Use this screen to change your ZyXEL Device’s time and date.

Logs

View Log

Use this screen to display your device’s logs.

Log Settings

Use this screen to select which logs and/or immediate alerts your device is

to record. You can also set it to e-mail the logs to you.

Tools

Firmware

Use this screen to upload firmware to your device.

Configuration

Use this screen to backup and restore your device’s configuration (settings)

or reset the factory default settings.

Restart

This screen allows you to reboot the ZyXEL Device without turning the

power off.

Diagnostic

General

Use this screen to test the connections to other devices.

DSL Line

These screen displays information to help you identify problems with the

DSL connection.

Table 6 Navigation Panel Summary

LINK

TAB

FUNCTION

Advertising
This manual is related to the following products: