1 manually assign a wpa key, Figure 26 manually assign a wpa key – ZyXEL Communications P-2602HW(L) Series User Manual
Page 67
P-2602H(W)(L)-DxA Series User’s Guide
Chapter 3 Internet and Wireless Setup Wizard
67
Note: The wireless stations and ZyXEL Device must use the same SSID, channel ID
and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is
enabled) for wireless communication.
4 This screen varies depending on the security mode you selected in the previous screen.
Fill in the field (if available) and click Next.
3.3.1 Manually Assign a WPA key
Choose Manually assign a WPA key in the Wireless LAN setup screen to set up a Pre-
Shared Key.
Figure 26 Manually Assign a WPA key
Security
Select Automatically assign a WPA key (only available if you enable OTIST) if you
want OTIST to configure a WPA key for you.
Select Manually assign a WPA-PSK key to configure a Pre-Shared Key (WPA-PSK).
Choose this option only if your wireless clients support WPA. See
for more information.
Select Manually assign a WEP key to configure a WEP Key. See
for more information.
Select Disable wireless security to have no wireless LAN security configured and
your network is accessible to any wireless networking device that is within range.
Back
Click Back to display the previous screen.
Next
Click Next to proceed to the next screen.
Exit
Click Exit to close the wizard screen without saving.
Table 13 Wireless LAN Setup Wizard 2
LABEL
DESCRIPTION