ZyXEL Communications P-2602HW(L) Series User Manual
Page 306
P-2602H(W)(L)-DxA Series User’s Guide
306
Chapter 25 Tools
After you see a “restore configuration successful” screen, you must then wait one minute
before logging into the ZyXEL Device again.
Figure 174 Configuration Upload Successful
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 175 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default device IP address (192.168.1.1). See
for details on how to set up your computer’s IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.
Figure 176 Configuration Upload Error