Zoom PD-01 - Manual (Page 6)

6
ZOOM Power Drive PD-01
Connections
How to connect the PD-01.
Open cover of battery
compartment and insert battery
1.
Turn amplifier off and connect cable
to guitar
2.
Plug cable from guitar into IN jack
of PD-01
3.
Take care to snap the battery to the
connector with correct polarity.
Make sure that the
plug is inserted fully
into the OUT jack of
the guitar.
Insert the cable from the guitar
into the IN jack of the PD-01.
This turns the PD-01 on.