Zoom PD-01 - Manual (Page 7)

7
ZOOM Power Drive PD-01
Connect cable to OUT jack of PD-01 4.
Connect another cable to the
OUT jack of the PD-01. Make
sure that the plug is inserted
firmly.
Raise volume 6.
Turn power to the amplifier on,
and raise the LEVEL control on
the guitar and PD-01.
Connect output cable to amplifier 5.
Plug the cable from the OUT jack of the PD-
01 to the IN jack of the amplifier.
If steps are performed in
reverse order, there is a
danger of damage to the
amplifier or speakers.
Always follow the
above sequence.