3 configuring servers behind sua (example), 4 selecting the nat mode, Figure 47 multiple servers behind nat example – ZyXEL Communications Prestige 2602H Series User Manual
Page 126

Prestige 2602H/HW Series User’s Guide
126
Chapter 7 Network Address Translation (NAT) Screens
7.3.3 Configuring Servers Behind SUA (Example)
Let's say you want to assign ports 21-25 to one FTP, Telnet and SMTP server (A in the
example), port 80 to another (B in the example) and assign a default server IP address of
192.168.1.35 to a third (C in the example). You assign the LAN IP addresses and the ISP
assigns the WAN IP address. The NAT network appears as a single host on the Internet.
IP address assigned by ISP.
Figure 47 Multiple Servers Behind NAT Example
7.4 Selecting the NAT Mode
You must create a firewall rule in addition to setting up SUA/NAT, to allow traffic from the
WAN to be forwarded through the Prestige.
Click NAT to open the following screen.
SNMP trap
162
PPTP (Point-to-Point Tunneling Protocol)
1723
Table 31 Services and Port Numbers (continued)
SERVICES
PORT NUMBER