ZyXEL Communications Prestige 2602H Series - Manual (Page 63)

Prestige 2602H/HW Series User’s Guide
Chapter 2 Introducing the Web Configurator 63
Voice SIP Settings Use this screen to configure your Prestige’s Session Initiation
Protocol settings.
QoS Use this screen to configure your Prestige’s Quality of Service
settings.
Phone Use this screen to configure your Prestige’s phone settings.
Speed Dial Use this screen to configure speed dial for SIP phone numbers
that you call often.
Lifeline Use this screen to configure your Prestige’s settings for PSTN
calls (Prestige 2602HW-L only).
Common Use this screen to configure general phone port settings.
Call Forward Use this screen to configure call-forwarding.
Dynamic DNS Use this screen to set up dynamic DNS.
Time and Date Use this screen to change your Prestige’s time and date.
Firewall Default Policy Use this screen to activate/deactivate the firewall and the
direction of network traffic to which to apply the rule.
Rule Summary This screen shows a summary of the firewall rules, and allows
you to edit/add a firewall rule.
Anti Probing Use this screen to change your anti-probing settings.
Threshold Use this screen to configure the threshold for DoS attacks.
Content Filter Keyword Use this screen to block sites containing certain keywords in the
URL.
Schedule Use this screen to set the days and times for the Prestige to
perform content filtering.
Trusted Use this screen to exclude a range of users on the LAN from
content filtering on your Prestige.
VPN Setup Use this screen to configure VPN connections and view the rule
summary.
Monitor Use this screen to display and manage active VPN connections.
Global Setting Use this screen to allow NetBIOS packets through the VPN
connections.
Remote
Management
Use this screen to configure through which interface(s) and from
which IP address(es) users can use Telnet/FTP/Web services to
manage the Prestige.
UPnP Use this screen to enable UPnP on the Prestige.
Logs Log Settings Use this screen to change your Prestige’s log settings.
View Log Use this screen to view the logs for the categories that you
selected.
Media Bandwidth
Management
Summary Use this screen to allocate an interface's outgoing capacity to
specific types of traffic.
Class Setup Use this screen to define a bandwidth class.
Monitor Use this screen to view bandwidth class statistics.
Maintenance
System Status This screen contains administrative and system-related
information.
Table 5 Web Configurator Screens Summary (continued)
LINK SUB-LINK FUNCTION