Create a new queue, Create a new simplex queue, Create a new queue -9 – Xerox COLOR 490 User Manual
Page 49: Create a new simplex queue -9, Create, A new queue
Advertising
Xerox 490/980 Color Continuous Feed Printing System
Pre-Calibration Engine Density Adjustment
Color Management Guide
4-9
Create a New Queue
The purpose of this section is to submit the density test pattern using the proper imposition,
queue and color settings. We do this by creating a new queue. Please follow the appropriate
procedure based on whether you have a simplex or duplex system.
Create a new Simplex Queue
Use this procedure to create a new queue for a simplex system.
1.
On the left-side navigation pane of the Xerox 490/980 Color Continuous Feed Printing
System PC-UI, select [Queue Management].
2.
Select [New] located at the lower right of the window.
Advertising