Create trc file with trc viewer, For simplex systems, Create trc file with trc viewer -14 – Xerox COLOR 490 User Manual
Page 74: For simplex systems -14
Color Calibration Process for v1.1.6 Software
Xerox 490/980 Color Continuous Feed Printing System
5-14
Color Management Guide
Create TRC File with TRC Viewer
Depending on whether you have a simplex system or a duplex system, use the appropriate
procedure.
For Simplex Systems
1.
Ensure that the 490/980 Color Continuous Feed Printing System Customer Documentation
CD is inserted into the CD-ROM Drive of the PC-UI computer.
2.
Open the TRC Viewer software from the main menu of the Xerox 490/980 Color Continuous
Feed Printing System Customer Documentation CD.
3.
When prompted by the Security Warnings, select [Run] twice to open the TRC Viewer
Software.
4.
Select the third option down on the right hand side of the window called [??..].
5.
Browse for the Upstream_1.txt (or similar named) file created by ColorPort located in [My
Documents].
6.
Select [Open].
Browse for input file