ZyXEL Communications AES-100 - Manual (Page 23)

AES-100 User’s Guide
Factory Default Settings 3-1
This section describes the factory default settings of the AES-100.
3.1 IP Parameters
• IP address = 192.168.1.1
• Subnet mask = 255.255.255.0
• Default gateway = 192.168.1.254
3.2 Console Port
• Baud rate = 9600 bps
• Data bits = 8
• Parity = none
• Stop bit = 1
• Flow control = none
3.3 SNMP Community Strings
• Read = public
• Write = 1234
3.4 Console, Telnet and FTP Password
• 1234 (default)
3.5 ADSL Ports
• Encapsulation: RFC 1483
• Multiplexing: LLC-based
• VPI: 0
• VCI: 33
• Enable/Disable State: Disabled
• Maximum Upstream Rate: 1024 Kbps for G.dmt, 512 Kbps for G.Lite
Chapter 3
Factory Default Settings