ZyXEL Communications IES-708-22A - Manual (Page 325)

Chapter 51 Firmware and Configuration File Maintenance
IES-708-22A User’s Guide
325
Enter the management password ( 1234 by default).
Use put to transfer the configuration file from the computer. The configuration file on the
system is named config-0 .
Quit FTP.
Wait for the update to finish. The system restarts automatically.
51.4 Firmware File Upgrade
Use the following procedure to upload firmware to the IES-708-22A.
Use an FTP client to connect to the IES-708-22A.
Enter the management password ( 1234 by default).
Transfer the firmware file to the IES-708-22A. The firmware file on your computer (that you
want to put onto the IES-708-22A is named
firmware.bin . The internal firmware file on the
IES-708-22A is named ras .
Password: 1234
230 Logged in
ftp> put xxx.dat config-0
ftp> quit
C:\> ftp <IES-708-22A IP address>
Type your user name and press [ENTER].
User (172.23.15.86:(none)): admin
Password: 1234
230 Logged in
ftp> put firmware.bin ras